United Kingdom & Ireland >
Products & Services >
Manufacturing and Industry >
Bodyshop Solutions >
How To >
Rectify Paint Defects
By Hand: Remove defect using 3M™ 9 Micron Abrasive Discs 260L (00127).
By Machine: using 3M™ Perfect-it™ III Microfinishing 260L 76mm P1500 (00907).
By Machine: using 3M™ Perfect-it™ Denibbing System (50666).
Printable Paint Rectification Process Board
Use 3M™ Trizact™ Fine Finishing Abrasive Discs P3000 76mm (50415) over the area to speed up polishing time.
Excess defects are removed by using 3M™ 260L Fine Finishing Discs P1200/1500 (50239/50238). Use with 3M™ Hookit™ Soft Interface Pad (05774).
Use 3M™ Trizact™ Microfinishing Discs P3000 150mm (50414) on a dampened panel to refine the sanding scratches. This will reduce risk of rework due to finish ‘dropping back’.
For more information or to discuss your specific requirements Contact Us
© 3M 2015. All Rights Reserved.