Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

Product Application


3M™ Cavilon™ No Sting Barrier Film

3M™ Cavilon™ No Sting Barrier Film - Product Application

3M™ Cavilon™ No Sting Barrier Film - Product Application

3M™ Cavilon™ No Sting Barrier Film - Product Application
  1. Skin should be clean and dry prior to application of Cavilon No Sting Barrier Film.
  2. Apply a uniform coating of film over the entire treatment area when using the foam applicator or stoma wipe. When using the spray bottle, hold the spray nozzle 10 to 15cm from the skin and apply in a smooth, even coating over the entire treatment area, whilst moving the spray in a sweeping motion.
  3. If an area is missed, re-apply to that area only after the first application has dried (approximately 30 seconds).
  4. If Cavilon No Sting Barrier Film is applied to an area with skin folds or other skin-to-skin contact, make sure that the skin contact areas are separated and allow the coating to dry before returning to normal positions.
  5. Re-application is recommended at least every 48-72 hours (under normal use) or more frequently if needed.

3M™ Cavilon™ Durable Barrier Cream
 

3M™ Cavilon™ Durable Barrier Cream - Product Application

3M™ Cavilon™ Durable Barrier Cream - Product Application

3M™ Cavilon™ Durable Barrier Cream - Product Application
  1. Use on clean, dry skin.
  2. Apply a small amount of Cavilon Durable Barrier Cream to the affected area, gently smoothing it into the skin.
  3. Re-apply following every 3rd episode of incontinence.

    Apply sparingly. If the ‘after-feel’  is ‘oily’,you have applied too much. 

back to top

 3M Cavilon Skin Care Products - Information for Patients
The requested content cannot be found.

Find Out More...

Cavilon No Sting Barrier Film

Cavilon Durable Barrier Cream

Choose Your Product

FAQs