Skip to Primary Navigation Skip to Site Navigation Skip to Main Content

Cable End Caps - Cold Shrink Pre-Stretched Rubber

3M Cold Shrink End Caps environmentally seal and mechanically protect exposed cable ends using no tools, mastics or tapes. They are close-ended, tubular rubber sleeves that are factory expanded and loaded onto a removable core. When positioned over the end of a cable, or other cylindrical object, the core is removed to provide a reliable seal that protects your cable ends from environmental damage. (I.e. moisture, contamination, corrosion, ozone, ultra-violet and radiation).

They are easily installed and cleanly removable, there are four different end caps available to accommodate a wide range of sizes.

Downloads

Cold Shrink Product Catalog
(PDF 1.1 MB)

Features


  • Simple & fast installation – no tools required
  • Wide range of cable sizes accommodated
  • Good abrasion resistance
  • Seals tight – retains resiliency & pressure after prolonged ageing & exposure
  • Water-resistant
  • No heat required
  • Resistant to acid, alkalis, fungus, ozone, UV
  • Easily removed

Applications


  • Cable protection from exposure to moisture, contamination, corrosion, ozone, UV radiation, and other environmental hazards
Product No. Use range (mm)
EC-1 11.6 - 20.9
EC-2 15.9 - 30.1
EC-3 26.0 - 49.2
EC-4 45.5 - 84.3

Have you considered?

ProductText
Cold Shrink Pre-stretched Tubes EPDM Rubber

ProductText
Cold Shrink Pre-stretched Tubes Silicone Rubber

ProductText
Cold Shrink Extension foam

ProductText
Electrical Tapes

ProductText
Medium Voltage Joints & Terminations

ProductText
Low Voltage Joints & Terminations

Cold Shrink Pre-stretched Tubes EPDM Rubber
3M Brand PST Cold Shrink Connector Insulators are a series of open-ended, tubular rubber sleeves, factory expanded and assembled onto a removable core. The core is removed after the tube has been positioned for installation over an inline connection, terminal lug, etc, allowing the tube to shrink and form a waterproof seal - No torches or heat required

View Products

Cold Shrink Pre-stretched Tubes Silicone Rubber
3M Brand PST Cold Shrink Connector Insulators are a series of open-ended, tubular silicone rubber sleeves, factory expanded and assembled onto a removable core. The core is removed after the tube has been positioned for installation over an inline connection, terminal lug, etc, allowing the tube to shrink and form a waterproof seal - No torches or heat required.

View Products

Cold Shrink Extension Foam
P84 Cold Shrink diameter extension foam increases the diameter of cables or tubes making the use of standard Cold Shrink tubes possible when the shrink ratio cannot normally be met

View Products

Electrical Tapes
3M offers a range of over 30 electrical tapes and mastics for insulation, jointing, corrosion protection, all weather protection and environmental sealing, ranging from affordable no nonscence tape to our premium range of indulation tapes.

View Products

Medium Voltage Joints & Terminations
Medium Voltage cable jointing and cable termination kits, from 3M, use our high quality Cold shrink cable joint & termination bodies. We also offer a range of corresponding accessories such as cable connectors, gland kits, lugs, barrier boots etc as well as cable cleaning and pulling products.

View Products

Low Voltage Joints & Terminations
3M produce a range of quality low voltage joints , low voltage terminations and cable sheath repair solutions for application across a diverse range of low voltage cable types and sizes up to 3.3kV (up to 6.6kV for unscreened cables). Heat shrink , cold shrink and resin jointing and terminating options are available.

View Products


If you need further information about cable end caps contact us by email or call us on 0845 602 8033
Where to Buy
Got a Question?
More Products