Skip to Primary Navigation Skip to Site Navigation Skip to Main Content

Hazard Area Joint & Termination Kits

There is no room for compromise in the matter of safety where electricity and electrical installations are concerned. At 3M we make every effort to maximise your safety and installation reliability. You are working within a hazardous environment, so our aim is to reduce unnecessary complications during installation.

Our manufacturing and laboratory site is ISO 9001 certified and all products are rigorously tested to ensure compliance with European standards. We have a comprehensive traceability procedure for all our cable accessories. All kits include installation instructions which exceed European requirements, because your safety is important to 3M.

3M™ Inline Joints for Hazardous Area Armoured Power Cables – Scotchcast™ LR Series Joints

In-line joints for Armoured PVC & XLPE Power cables - 0.6/1kV and up to 3.3kV - Hydro- Carbon Resistant/Flame Retardant Resin Encapsulated - For use in Petrochem Zones 1 & 2. Also suitable for Lead sheathed cables, and Transition Joints. Includes Scotchcast™ 1400U Resin that makes it suitable for areas where there is danger of gas, oil, sewage or chemical spillage.

 

3M™ In-Line Joints for Hazardous Area Un-armoured Power Cables - Scotchcast™ 92-U Series Joints

In-Line Joint for Un-Armoured PVC & XLPE Insulated Cables - 0.6/1kv Hydro-carbon resistant / Flame retardant Resin Encapsulated - for use in Petrochem Zones 1 & 2 Includes Scotchcast™ 1400U Resin that makes it suitable for areas where there is danger of gas, oil, sewage or chemical spillage.
 

3M™ LV Inline Joints for Hazardous Area Control Cables - Scotchcast™ CR Series

In-line joints for 0.6/1kV XLPE & PVC Insulated, Lead sheathed Control cables - Hydro- Carbon Resistant/Flame Retardant Resin Encapsulated - For use in Petrochem Zones 1 & 2 For Conductor Sizes: 1.5mm² and 2.5mm² Includes Scotchcast™ 1400U Resin that makes it suitable for areas where there is danger of gas, oil, sewage or chemical spillage.

 

3M™ LV Inline Joints for Hazardous Area Instrumentation Cables – Scotchcast™ IR Series

In-line joints for 0.6/1kV Polyethylene Insulated, Lead sheathed, Armoured Instrumentation cables - Hydro-Carbon Resistant/Flame Retardant Resin Encapsulated - For use in Petrochem Zones 1 & 2. For Conductor Sizes: 0.5mm² solid, 0.5mm² Flexible, 1.0mm2 solid, or 1.5mm2 stranded conductors.

Suitable for cables with either unscreened pairs, individually screened pairs, collectively screened pairs, or individually and collectively screened pairs. Includes Scotchcast™ 1400U Resin that makes it suitable for areas where there is danger of gas, oil, sewage or chemical spillage.

 

3M™ In-Line Joints for Mines & Quarries - Power, and Signal & Telephone Cables

In Line Joints for Power unscreened cables rated up to & including 3.3kV, and Signal & Telephone Cables. Includes Scotchcast™ 1400U Resin that makes it suitable for areas where there is danger of gas, oil, sewage or chemical spillage. Simple combined earth screen and armour continuity system, Fire resistant, Moisture proof, Approved by UK Coal.

 

3M™ QS1000 Inline Joints for Mines & Quarries – 3 Core Screened Power Cables rated 6.6/11kV

Cold Shrink One piece silicone splice body, encapsulated using Scotchcast™ 1400U Resin that makes it suitable for areas where there is danger of gas, oil, sewage or chemical spillage. Mechanical connectors are included.

Fire resistant, Moisture proof, Approved by UK Coal.

 

Have you considered?

ProductText
Medium Voltage Joints & Terminations

ProductText
Low Voltage Joints & Terminations

ProductText
Electrical Tapes

ProductText
Cable & Wire Management

ProductText
Lugs & Connectors

ProductText
Resins

Medium Voltage Joints & Terminations
Medium Voltage cable jointing and cable termination kits, from 3M, use our high quality Cold shrink cable joint & termination bodies. We also offer a range of corresponding accessories such as cable connectors, gland kits, lugs, barrier boots etc as well as cable cleaning and pulling products.

View Products

Low Voltage Joints & Terminations
3M produce a range of quality low voltage joints , low voltage terminations and cable sheath repair solutions for application across a diverse range of low voltage cable types and sizes up to 3.3kV (up to 6.6kV for unscreened cables). Heat shrink , cold shrink and resin jointing and terminating options are available.

View Products

Electrical Tapes
3M offers a range of over 30 electrical tapes and mastics for insulation, jointing, corrosion protection, all weather protection and environmental sealing, ranging from affordable no nonscence tape to our premium range of indulation tapes.

View Products

Cable & Wire Management
The Scotchcode range offers a multitude of ways to mark your product from cables and wires to motor leads to sports equipment. The range features dispensers, pre-printed alphanumeric and coloured tape, and write-on books and tags.

View Products

Lugs & Connectors
3M have designed lugs and connectors with the reliability and ease of installation that Electricians demand. 3M has always provided connection technology that saves time and money. 3M manufacture a wide range of quality connectors and lugs suitable for a variety of applications.

View Products

Resins
3M offer a high quality range of resins for low and medium voltage applications. They have excellent adhesion to cable jacket minerals, together with excellent mechanical, electrical and chemical resistance.

View Products
Where to Buy
Got a Question?
More Products