Skip to Primary Navigation Skip to Site Navigation Skip to Main Content

Medium Voltage Products

Medium Voltage Products from 3M, include cable jointing and termination kits, using our high quality Cold Shrink cable joint and termination bodies. We also offer a range of corresponding accessories such as cable connectors, gland kits, lugs, barrier boots etc as well as cable cleaning and pulling products.

Medium Voltage Cable Joints – Cold Shrink

Medium Voltage Cable Joints – Cold Shrink

All Cold Shrink joints include built in components to ensure sound insulation, stress control and adequate earth potential over the screens. With piece of mind and reliability top of our agenda; unlike heatshrink alternatives, a molecular permanent set ensures constant radial pressure is exerted on the cable for the duration of the cable joint's life. Additionally, many of the joint bodies are comprehensively factory tested before release... something simply not possible with heatshrink due to it's material nature. Finally, much like our range of joints, only 3M can offer you such a choice in Cold Shrink technology in terms of product cost and application flexibility.

 
Medium Voltage Cable Terminations – Cold Shrink

Medium Voltage Cable Terminations – Cold Shrink

Cold applied cable terminations up to 36/69(72.5) kV

All Cold Shrink terminations include built-in refractive stress control tube and silicone combined with an integrated top seal. No need to file the lug and less room for error in tube placement… just two benefits of using the 3M solution verses a heatshrink alternative. Finally, much like our range of terminations, only 3M can offer you such a range of product technologies varying in cost and application flexibilty for medium voltage cable terminations - helping you make that switch:

 

Have you considered?

ProductText
Earthing Kits

ProductText
Low Voltage Joints & Terminations

ProductText
Electrical Tapes

ProductText
Cable & Wire Management

ProductText
Lugs & Connectors

ProductText
Cold Shrink Tubes & End Caps

Earthing Kits
3M offer a range of earthing solutions from shielding and grounding braid to constant force springs and armour continuity kits.

View Products

Low Voltage Joints & Terminations
3M produce a range of quality low voltage joints , low voltage terminations and cable sheath repair solutions for application across a diverse range of low voltage cable types and sizes up to 3.3kV (up to 6.6kV for unscreened cables). Heat shrink , cold shrink and resin jointing and terminating options are available.

View Products

Electrical Tapes
3M offers a range of over 30 electrical tapes and mastics for insulation, jointing, corrosion protection, all weather protection and environmental sealing, ranging from affordable no nonscence tape to our premium range of indulation tapes.

View Products

Cable & Wire Management
The Scotchcode range offers a multitude of ways to mark your product from cables and wires to motor leads to sports equipment. The range features dispensers, pre-printed alphanumeric and coloured tape, and write-on books and tags.

View Products

Lugs & Connectors
3M have designed lugs and connectors with the reliability and ease of installation that Electricians demand. 3M has always provided connection technology that saves time and money. 3M manufacture a wide range of quality connectors and lugs suitable for a variety of applications.

View Products

Cold Shrink Tubes & End Caps
The E.P.D.M or silicone rubber is pre-stretched, and loaded onto a removable core. Cold Shrink products require no heat, and no tools to install. With 20 years of proven field history, 3M Cold Shrink products will retain performance and resiliency for the life of the cable.

View Products


If you need further information about medium voltage products contact us by email or call us on 0845 602 8033

Where to Buy
Got a Question?
More Products