Skip to Primary Navigation Skip to Site Navigation Skip to Main Content

Resins

3M offer a high quality range of resins for low and medium voltage applications. They have excellent adhesion to cable jacket minerals, together with excellent mechanical, electrical and chemical resistance. They are suitable for all sizes and types of closures and have VDE 0291 Part 2 approval.

The Advanced Resin Delivery System

The Advanced Resin Delivery System

The Unique Advanced Resin Delivery System from 3M offers totally enclosed mixing and pouring with no spillage or accidental contact whatever your working conditions.
 
Scotchcast™ No. 1471 Two-component Polyetherurethane Resin

Scotchcast™ No. 1471 Two-component Polyetherurethane Resin

An unfilled solvent free two-component polyetherurethane resin for room Temperature curing. It is an extremely reliable power jointing resin incorporated in many of the 3M Scotchcast cable joints which provides good mechanical and electrical properties

 
Scotchcast™ No. 1400U Two Component Polyetherurethane Resin

Scotchcast™ No. 1400U Two Component Polyetherurethane Resin

A flame retardant, solvent free two component Polyetherurethane resin with long term resistance against most hydrocarbons, suitable for hazard areas where there is a danger of gas, oil, sewage or chemical spillage, and in Zones 1 & 2 Hazardous Areas.

 
Scotchcast™ 2130 Two Component Polyetherurethane Electrical Insulating Resin

Scotchcast™ 2130 Two Component Polyetherurethane Electrical Insulating Resin

A flame retardant, flexible, two-part, polyurethane resin that is designed to replace the cable jacket when jointing or repairing flexible cables.

 
Scotchcast™ No 4 Resin Unfilled solvent free two-component epoxy resin for room temperature curing

Scotchcast™ No 4 Resin Unfilled solvent free two-component epoxy resin for room temperature curing

A two-part epoxy insulating and encapsulating resin packed in three sizes. This resin, mixed in its unique container bag generates its own heat to cure. The nature of the viscosity, which first decreases to allow it to flow into crevices and awkward spots and then increase rapidly to cure, makes it ideal for small joints. Its compatibility with solid and synthetic cable insulations and jackets makes it an excellent insulator and sealer for cable splicing, ideal for high humidity areas.

 
8882 High Gel Re-enterable Resin

8882 High Gel Re-enterable Resin

using an advanced compound technology, High Gel yields a higher level of adhesion than encapsulants costing much more. This is because High Gel is designed to absorb cable-filling materials, yet remain easily and completely reenterable. Insulate joints for solid dielectric and oil filled cables up to 8KV encapsulate high voltage splices up to 69KV.
 
3M™ PBR Re-enterable two part, filled, flexible, isocyanate-free compound for room temperature curing

3M™ PBR Re-enterable two part, filled, flexible, isocyanate-free compound for room temperature curing

3M PBR Filler is suitable for the jointing of low voltage power cables. As it is a re-enterable material, it is ideal for the temporary protection of cable joints. The filler ensures a waterproof seal, electrical insulation and affords a reasonable amount of mechanical protection.
 

Have you considered?

ProductText
Medium Voltage Joints & Terminations

ProductText
Low Voltage Joints & Terminations

ProductText
Electrical Tapes

ProductText
Cable & Wire Management

ProductText
Lugs & Connectors

ProductText
Cold Shrink Tubes & End Caps

Medium Voltage Joints & Terminations
Medium Voltage cable jointing and cable termination kits, from 3M, use our high quality Cold shrink cable joint & termination bodies. We also offer a range of corresponding accessories such as cable connectors, gland kits, lugs, barrier boots etc as well as cable cleaning and pulling products.

View Products

Low Voltage Joints & Terminations
3M produce a range of quality low voltage joints , low voltage terminations and cable sheath repair solutions for application across a diverse range of low voltage cable types and sizes up to 3.3kV (up to 6.6kV for unscreened cables). Heat shrink , cold shrink and resin jointing and terminating options are available.

View Products

Electrical Tapes
3M offers a range of over 30 electrical tapes and mastics for insulation, jointing, corrosion protection, all weather protection and environmental sealing, ranging from affordable no nonscence tape to our premium range of indulation tapes.

View Products

Cable & Wire Management
The Scotchcode range offers a multitude of ways to mark your product from cables and wires to motor leads to sports equipment. The range features dispensers, pre-printed alphanumeric and coloured tape, and write-on books and tags.

View Products

Lugs & Connectors
3M have designed lugs and connectors with the reliability and ease of installation that Electricians demand. 3M has always provided connection technology that saves time and money. 3M manufacture a wide range of quality connectors and lugs suitable for a variety of applications.

View Products

Cold Shrink Tubes & End Caps
The E.P.D.M or silicone rubber is pre-stretched, and loaded onto a removable core. Cold Shrink products require no heat, and no tools to install. With 20 years of proven field history, 3M Cold Shrink products will retain performance and resiliency for the life of the cable.

View Products
Where to Buy
Got a Question?
More Products